搜索结果: 1-13 共查到“工学 Inoculation”相关记录13条 . 查询时间(0.156 秒)
Inoculation of pure aluminium aided by electromagnetic field
Foundry sand system Used sand Reclamation Waste management
2011/3/15
The article is devoted to the description of a new integrated system for processing and reclamation of moulding and core sands using the equipment developed by Foundry Research Institute in Krakow. Th...
Influence of Inoculation on Properties of Aluminium EN AW-Al99,5
Mechanical properties Aluminium Titanium Boron Electromagnetic field
2011/3/11
The main aim of studies was to determine common influences of two different structure refinement methods on EN AW-Al99,5 electrical conductivity and deformability. The first method is internal factor ...
Simultaneous Inoculation of Malbec (Vitis vinifera) Musts with Yeast and Bacteria: Effects on Fermentation Performance,Sensory and Sanitary Attributes of Wines
malolactic fermentation Oenococcus oeni Saccharomyces cerevisiae
2009/8/10
Malolactic fermentation has important consequences for the quality of wine. The present study analyzes the effect of timing of inoculation with bacteria on the performance of alcoholic and malolactic ...
Improvement of Protein Content of Garri by Inoculation of Cassava Mash with Biomass from Palm Wine
Protein Content Cassava Mash
2009/5/31
This study was done to determine the suitability of the biomass contained in the dregs of palm wine, an alcoholic beverage, as an alternative to pure cultures of microorganisms suggested earlier as in...
Inoculation of chromium white cast iron
Inoculation Chromium Cast Iron Structure Mechanical Properties Boron Carbide Chromium Carbide
2009/2/26
It has been proved that an addition of boron carbide introduced as an inoculant to the chromium white cast iron changes the structure of castings. Castings after inoculation revealed a different struc...
Inoculation of chromium white cast iron
Inoculation Chromium Cast Iron Structure Mechanical Properties Boron Carbide Chromium Carbide
2009/2/26
It has been proved that an addition of boron carbide introduced as an inoculant to the chromium white cast iron changes the structure of castings. Castings after inoculation revealed a different struc...
Effect of inoculation on high temperature plastic properties of the centrifugally cast Cr-Ni-Nb steel
High-temperature mechanical properties Austenitic Cr-Ni-Nb cast steel Centrifugal casting
2008/7/14
From the centrifugally cast sleeve segments, in direction parallel to the axis, the specimens for mechanical tests were cut out in a way such as to get in one batch of the specimens a structure compos...
Effective inoculation of low-sulphur cast iron
Inoculation Cast iron Dendrites Structure Mechanical properties
2008/7/4
The study proves that by introducing the disintegrated steel scrap to low-sulphur cast iron still before the inoculation carried out with a conventional graphitising inoculant, the mechanical properti...
Purpose: The main aim of investigations was the reduction of grain size and unification of structure for pure Al casting by introduction of small amount of inoculant (less than obligatory standart PN-...
Effect of Dilution Rate on Bacteriophage Development in an Immobilized Cell System Used for Continuous Inoculation of Lactococci in Milk
Lactococcus lactis ssp. lactis bacteriophage immobilized cells continuous fermentation
2008/3/25
The response to bacteriophage contamination of a free cell and an immobilized cell bioreactor was studied during continuous pH-controlled fermentation of milk with Lactococcus lactis ssp. lactis. Afte...
Process Performance of Continuous Inoculation and Acidification of Milk with Immobilized Lactic Acid Bacteria
lactic acid bacteria immobilization acidification inoculation
2008/3/23
Several parameters of a milk prefermentation process by immobilized lactic acid bacteria in a stirred bioreactor were investigated. This process was designed to acidify and inoculate skim milk continu...
Development of a Spiral Mesh Bioreactor with Immobilized Lactococci for Continuous Inoculation and Acidification of Milk
immobilized lactococci continuous acidification immobilized cell bioreactor continuous inoculation
2008/3/18
A laboratory-scale bioreactor with lactococci immobilized in calcium alginate gel was developed for continuous acidification and inoculation of milk. Cells were entrapped in a calcium alginate film co...
Inoculation of aluminium with titanium and boron addition
Working properties of materials and products Aluminium Titanium
2007/7/30
Purpose: The main aim of studies was to determine mechanism of inocualtion of pure alumnium EN AW-Al99,5 structure with addition of titanium and boron, which are introduced to liquid metal in small am...