搜索结果: 1-15 共查到“材料科学 Part I”相关记录16条 . 查询时间(0.078 秒)
2023年9月13日，材料学院宋国勇教授团队在复合材料期刊《Composites Part B: Engineering》（IF="13.1）发表了题为“Catechyl lignin-reinforced mechanical performances of Poly(vinyl alcohol)-Based materials”论文。文章报道了C-木质素基复合材料研究成果。
中国地质大学科学技术发展院赵思佳(硕士研究生)，周克清*等，工程学院 Available online 25 April 2019，Composites Part A:Applied Science and Manufacturing, In situ fabrication of molybdenum disulfide based nanohybrids for reducing fire hazards of epoxy
层状；二硫化钼；二维纳米；结构；优异
2019/4/29
近日，国际著名学术期刊《Composites Part A: Applied Science and Manufacturing》在线刊发了中国地质大学工程学院周克清副教授团队的研究成果——“In situ fabrication of molybdenum disulfide based nanohybrids for reducing fire hazards of epoxy”。该文第一作者...
Integration of part classification, cell formation and capacity adjustment
Integration part classification cell formation capacity adjustment
2010/4/12
In today’s competitive market improving productivity is of great concern for any manufacturing firm. Production engineers continuously adapt state-of-the-art techniques and methodologies in order to a...
Characteristics of flake graphite in Ni-Mn-Cu cast iron. Part 2
Flake graphite Austenitic cast iron Ni-Mn-Cu cast iron
2009/7/21
The results of examinations of the carburizers for foundry industry were presented in the article. The commonly used carburizers were selected for the experiments (anthracite, natural and synthetic gr...
Characteristics of flake graphite in Ni-Mn-Cu cast iron. Part 2
Flake graphite Austenitic cast iron Ni-Mn-Cu cast iron
2009/7/20
The paper continues the article published by Archives of Foundry Engineering, vol. 9, issue 1/2009, pp. 185-290, that presented influence of chemical composition of hypo- and hypereutectic nickel-mang...
Computer aided process of dimensional distortion determination of bounded plaster sandmix Part II
Innovative foundry technologies and materials Precision casting Plaster mould Dilatation
2009/7/16
A computer program allowing calculation of dimensional changes of mould made of cristobalite-gypsum composition in process of its heat treatment and preparation for molten metal casting is presented i...
Characteristics of flake graphite in Ni-Mn-Cu cast iron. Part 1
flake graphite austenitic cast iron Ni-Mn-Cu cast iron
2009/2/26
Relationship between chemical composition of cast iron and properties of flake graphite occurring in hypoeutectic and eutectic nickel-manganese-copper cast iron was determined. The research covered ov...
Characteristics of flake graphite in Ni-Mn-Cu cast iron. Part 1
flake graphite austenitic cast iron Ni-Mn-Cu cast iron
2009/2/26
Relationship between chemical composition of cast iron and properties of flake graphite occurring in hypoeutectic and eutectic nickel-manganese-copper cast iron was determined. The research covered ov...
Determination of application possibilities of microwave heating in the curing process of water glass molding sands with fluid esters. Part 2
innovative foundry materials and technologies ester curing water glass molding sand microwaves
2009/2/26
This article, constituting continuation of the subject discussed in the first part, presents results of the experimental trial of water glass molding sands’ curing method modification with application...
Determination of application possibilities of microwave heating in the curing process of water glass molding sands with fluid esters. Part 2
innovative foundry materials and technologies ester curing water glass molding sand microwaves
2009/2/26
This article, constituting continuation of the subject discussed in the first part, presents results of the experimental trial of water glass molding sands’ curing method modification with application...
Determination of application possibilities of microwave heating in the curing process of water glass molding sands with fluid esters. Part 1
innovative foundry materials and technologies ester curing water glass molding sand microwaves
2009/2/26
This article presents results of the experimental trial of combination of the chemical method of water glass molding sands’ curing, used in foundry industry, with an innovative microwave heating. The ...
Determination of application possibilities of microwave heating in the curing process of water glass molding sands with fluid esters. Part 1
innovative foundry materials and technologies ester curing water glass molding sand microwaves
2009/2/26
This article presents results of the experimental trial of combination of the chemical method of water glass molding sands’ curing, used in foundry industry, with an innovative microwave heating. The ...
316L不锈钢强流脉冲电子束表面改性研究 Part I 表面选择净化及机理
强流脉冲电子束 不锈钢 表面净化 火山坑
2008/12/9
本文详细研究了强流脉冲电子束对316L不锈钢表面改性的过程和机理。结果表明，316L不锈钢中的MnS夹杂物是轰击过程中形成火山坑的核心，其自身或界面过热喷发是火山坑的成因。随着轰击次数的增加，表层中MnS夹杂物随喷发而逐渐减少，实现了材料的表面选择净化。与此同时，表面缺陷在反复轰击过程中得到修复，即火山坑的密度随轰击次数减少，形态也逐渐由心部有孔转变为心部无孔。
316L不锈钢强流脉冲电子束表面改性研究 Part II 在模拟体液中的腐蚀行为
强流脉冲电子束 电化学阻抗谱 极化曲线 火
2007/12/21
本文采用电化学阻抗谱(ElS)和动态极化的方法研究了316L不锈钢经过强流脉冲电子束表面改性后在模拟体液中的腐蚀行为。结果表明，电子束轰击可以有效地提高316L不锈钢在模拟体液中的耐腐蚀性。经过改性的样品其界面电容下降，极化电阻升高。5次轰击后的样品表面因其火山坑的中心位置残存MnS夹杂或小孔而更易发生点蚀。20次轰击后的样品具有最佳的耐蚀性，其腐蚀电流密度降至原始样品的1/15左右，这主要归因于...
MICROADDITIONS OF BORON AND VANADIUM IN ADI PART 2. OWN INVESTIGATIONS
Innovative foundry materials and technologies Heat treat
2007/3/12
In the second part of the study, describing the role of vanadium and boron microadditions in the process of structure formation in heavy-walled castings made from ADI, the results of own investigation...