搜索结果: 1-5 共查到“冶金工程技术 Method”相关记录5条 . 查询时间(0.156 秒)
Gradient tool WC/HS6-5-2 materials produced using the powder metallurgy method
Tool materials Uniaxial pressing Sintering High-speed steel
2009/12/2
Purpose: The goal of this work is development of the new group of the gradient cermets with the high-speed steel
matrix, reinforced with the hard carbides phases of the WC types.
Design/methodology/...
The microstructure of HS 6-5-2 steel in the areas overlapping remelting obtained by the use of GTAW method
Heat treatment Metallography GTAW method Directional crystallizatio
2008/4/29
The work presents microstructures of HS 6-5-2 high-speed steel from the areas overlapping remelting. The surface layer of the steel was remelted using the GTAW method. The microstructure photos were t...
Microhardness changes of surface layer of HS 6-5-2 steel in the areas overlapping remelting obtained with the use of GTAW method
Heat treatment Metallography GTAW method Directional crystallization
2008/4/29
The work presents test results of microhardness of surface layer of HS 6-5-2 high-speed steel from areas overlapping remelting. The surface layer of the steel was remelted using the GTAW method. The m...
CRYSTALLIZATION ANALYSIS OF ALMG (AG 10) ALLOY WITH USE OF ATND METHOD
Theoretical fundamentals of casting processes crystallization
2007/3/12
The paper presents results of non-ferrous metal crystallization research with use of ATND method. The research was carried out in the Faculty of Chipless Forming Technology, University of Bielsko-Bia&...
COMPUTATION OF INTERFACE CURVATURE IN MODELLING OF SOLIDIFICATION BY THE METHOD OF CELLULAR AUTOMATON
Solidification Modeling Cellular Automaton Artificial Anisotropy
2007/3/12
Modelling of solidification process by the method of cellular automaton (CA) requires determination of geometrical characteristics of the interface, i.e. of its direction and curvature.